SAFETY ● RELIABILITY ● COMFORT
click
The quietest furnace you can buy - and one of the most efficient!
 | SilentComfort™ technology - Delivers the ultimate in quiet, consistent cooling |
| Variable Speed Blower Motor - Ramps up and down slowly so there's no sudden, noisy blast of air at start-up |
| Fully Insulated Cabient -Patented noise-reducing construction further minimizes operating sound to an industry leading low level |
| Precise Comfort™ technology |
| Automatically adjusts heat and airflow capacity in increments as small as 1% for the ultimate in temperature control |
| AirFlex™ technology - Offers custom settings which can be selected to meet each home's specific year-round comfort requirements |
| Zoning - Compatible Design - Works with Lennox' Harmony III™ zoning system to deliver the right amount of comfort for up to four zones |
| Variable Speed Blower Motor - Provides a quiet, consistent flow of air for enhanced temperature and humidity control |
| Variable-Capacity Operation - Goes beyond typical low and high two-stage operation, varying output from 40% to 100% |
| Efficiency rating of 95% AFUE - Can save you hundreds of dollars each year, compared to standard furnaces |
| Energy Star® qualified – Meets or exceeds EPA guidelines for energy efficiency |
| Variable Speed Inducer - Automatically adjusts to match the system requirements, maintaining balanced combustion and efficiency |
| Dual-fuel Capability — Can be combined with an electric heat pump to enhance comfort and fuel efficiency by alternating between |
| electric and gas heat, optimizing energy use and minimizing heating costs. |
| Duralok Plus® Heat Exchanger - Made of patented ArmorTuf™ steel to ensure high reliability and efficiency |
| SureLight® Igniter - Silicone nitride construction ensures long product life and reliable operation |
| SureLight® Control Board - Direct-readout diagnostics allow simple, quick troubleshooting |
| Limited Lifetime Warranty on heat exchanger |
| 10-Year Limited Warranty on covered components |
Free At Home Estimate for new furnace or air conditioner.
(303) 798-3880 Denver Metro
Check, Service and Clean Furnace
Check list
1. Clean interior & exterior of furnace. - Provides safety.
2. Clean burners. - Dirty burners prevent gas from being burned properly & efficiently.
3. Clean pilot assembly. - Adjust flame. Extends life of thermocouple, saves money.
4. Check thermocouple or flame sensor. - Prevent emergency service call.
5. Set gas manifold pressure. - Provides safety, extends life of heat exchanger, fuel economy & system effectiveness.
6. Check safety devices. - Inoperative safety controls can cause dangerous problems.
7. Inspect heat exchanger for cracks and leaks. - Safety check for possibility of leak of carbon monoxide into
the house & flame rollout.
8. Clean heat exchanger. - Provides better heat transfer - system effectiveness & fuel economy.
9. Check blower motor and lube. - Extends life, saves money, prevents failure.
10. Clean blower motor/blower wheel. - Lengthens motor life, system effectiveness in air movement.
11. Check fan control. - Avoids wasting heat and improves comfort conditions.
12. Inspect electrical wiring. - Damaged wiring can cause short and damage to electronic controls.
13. Check limit control. - Keeps unit in safe operating condition.
14. Check and secure all panels. - Newer systems have a door safety switch and will not work if not secure properly.
15. Install new air filter. - Dirty air filter increase operating costs and overheats heat exchanger decreasing its life.
16. Test for gas leaks. - Safety check.
17. Test for carbon monoxide. - Safety check.
18.Check thermostat contacts. - Saves money increases comfort.
19.Check for vibration and noise levels. - Increases comfort and extends life of system.
20.Check for combustion air. - Blocked or restricted combustion air openings can be dangerous .
21.Inspect flue and diverter. - Ensures safe operation. Flue pipe corrosion or leaks are dangerous.
22.Check temperature difference of supply & return air. - Temperature difference indicates production and capacity
of unit and comfort level.
23.Check for proper clearances. - Safety and performance of furnace.
24.Make proper recommendations. - Opportunity to learn a few things about your furnace.